• Mimaki CJV30-100 Printer/Cutter (40-inch)

Mimaki CJV30-100 Printer/Cutter (40-inch)

The CJV30-100 is a printer-cutter that combines fast printing and cutting with a compact design, high quality output and a small footprint.
Its unmatched performance and production make the CJV30-100 the ultimate print & cut solution for businesses requiring both high quality and quick response. It’s the ideal machine for signmakers and other print service providers offering over the counter direct services.

  • High quality printing up to 1440 dpi
  • Maximum printing speed 17.5 m2/h
  • Automatic switching from printing to cutting
  • Continuous crop mark detection for accurate contour cutting
  • Simultaneous white and full colour printing
  • Sparkling Metallic ink
  • Continuous printing with the Uninterrupted Ink Supply System
  • RIP, cutting, and creation software included

Mimaki CJV30-100 Printer/Cutter (40-inch)

Technical Specs & Details
Model CJV30-100
Maximum printing width 1,020mm (40.1")
Print resolution 540dpi, 720dpi, 1440dpi
Print mode 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink Type Solvent ink: ES3
Capacity 4-colour mode: 440cc cartridge x 2/colour = 880cc/ colour
6-colour mode: 440cc cartridge x 1/colour = 440cc/ colour
Media Width 1,030mm (40.5")
Thickness Less than 1.0mm
Roll weight Less than 25kg (55lbs.)
Roll diameter Inside: 2 inch, 3inch / Outside: Less than Ø 180mm (7.1")
Maximun cutting speed 30cm 11.8"/s
Cutting force 10-350g
Applicable tools Cutter, Water based ball-point pen, oil based ball-point pen
Media cutting Cutting in the Y direction by the cutter on the head
Media heater Pre / print / post heater
Media take-up device Roll take-up device (Standard) inside, outside selectable
Command MRL-III, MGL-IIc2
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL60950, CE Marketing (EMC directive, low voltage directive) CB, report
Power AC100~240V, less then 1,380VA
Operational Environment 20ºC ~ 35ºC (64~95ºF), Humidity:35~65%RH (No condensation)
Dimentions W=1,934mm (76.1") x
D=739mm (29.1") x
H=1,424mm (56.1")
Weight 130kg (286lbs.)
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Mimaki CJV30-100 Printer/Cutter (40-inch)

Warranty Information
1 Year Manufacturer Warranty.

Write a review

Note: HTML is not translated!
    Bad           Good

Mimaki CJV30-100 Printer/Cutter (40-inch)

  • Brand: Mimaki
  • Product Code: CJV30-100
  • Availability: In Stock
  • $2,589.00

  • Ex Tax: $2,589.00

Tags: Mimaki CJV30-100 Printer/Cutter (40-inch)